TT-Miner v3.2.2 (Nvidia GPU miner) — program for video cards of the Nvidia family. It is mainly used for mining on the ProgPOW algorithm. It takes the miner about 4-5 minutes until he shows a stable hash rate.
DevFeeis 1% for all algorithms.
Please note that the Linux version of TT-Miner requires Ubuntu 18.04 or later!
To quickly start cryptocurrency mining with TT-Miner, you need:
Unzip it to any convenient place
Change wallet to your
After downloading the program, you will find ready-made examples of customized .bat files for mining and instructions in Russian.
For quick launch, just open the file with the .bat extension in any text editor and replace the wallet with your own. Below we will tell you how to do this, as well as how to more finely tune the program to your needs.
So, let’s start editing the batch file – we need to change the wallet address and configure some other parameters for your equipment. To do this, right-click on the .bat file and select the “Edit” item.
A text document opens with command line arguments. Consider what kind of teams are contained in our batch file.
Customizing a batch file
Example of bat file
TT-Miner.exe -A BLAKE2S -coin kda -luck -log -logpool -P YOUR_WALLET.YOUR_WORKER@kda-us.icemining.ca:3700
TT-Miner.exe -A BLAKE2S -coin kda -luck -log -logpool -P https://YOUR_WALLET@NODE_SERVER:NODE_PORT
TradeTec-MinerCmd.exe – indicate in the batch file which program we want to run. This file should be in the same folder as our batch file
PROGPOW-100 – specify the coin algorithm that we are going to mine
iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg – after the construction -P stratum + tcp: // specify the address of our digital wallet. You can take it on the exchange where the coin is traded, or install a cold wallet
rig1 –after we entered the wallet address, put a dot and indicate the name of our farm. You can use any. This is necessary to track statistics on the pool.
bci-eu.coinblockers.com – after the @ sign we indicate the address of the pool.
3910 specifying the address of the pool, put a colon and indicate the port of the pool
—list-devices – the command will display all available mining devices
These are all the necessary commands to run the program. Below is an example with payfrom (payout mode). On some pools, you can adjust the frequency of payments. We have commented out this example with the REM team. If you remove this command, then example No. 2 will be used.
So we set up the program for the first launch. How to run it? The cryptocurrency mining process is launched by double-clicking on the created or edited batch file (file with the .bat extension). So, we launch and look at what the program console writes to us.
TradeTec-Miner – the program reports the installed version
Found 2 CUDA devices – two mining devices available
#0 PCI 0:1 GeForce GTX 1080 Ti (6.1) CoreClk 139 MHz | MemClk 495 MHz | 11264 MB | SM: 28 – name of the video card, overclocked its core and memory, available amount of video memory
bci-eu.coinblockers.com:3910 – the pool that we indicated in the batch file
iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg – address of the wallet to which the extracted coins will be sent
YOUR WORKER – farm name (optional)
Use algo: ProgPoW (Programmatic Proof-of-Work) – we specified the ProgPoW algorithm
CUDA 10.0 – cuda architecture on which graphics cards work
Press ‘Q’ – to stop mining and terminate if you press the Q key in the active miner window, the program will close
Set nonce generation to mode: 3 — timeout: 0.00 secs. – nonce is set to mode 3. More on this below.
Subscribed to bci-eu.coinbiockers.com:3910 – we were able to connect to the pool
Received new job#: d27a – pool sent a new job for video cards
Pool difficulty update: 0.08 GH – the pool set the difficulty to 0.08 GH. convenient power calculator you will find here
Worker authorized: YOUR WORKER – we logged in to the pool
create new DAG for epoch 6 – DAG file for mining is generated. Need to wait a bit
DAG created in 2.7 seconds – DAG file created in 2.7 seconds
Accepted 86 ms. bci-eu.coinbiockers.com:3910 – The pool made a decision (share) from our video card. The remuneration to the miners is paid precisely for the number of resolved ball.
It takes the miner about 4-5 minutes until he shows a stable hash rate.
Example batch file:
TradeTec-MinerCmd.exe -A PROGPOW-100 -P stratum+tcp://iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg.email@example.com:3910 --list-devices
rem using payfrom on CoinBlockers
rem TradeTec-MinerCmd.exe -A PROGPOW-100 -P stratum+tcp://iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg.rig1:firstname.lastname@example.org:3910 --list-devices
echo restart miner...
There is a dilemma: can a payment already be considered received if the deposit transaction is in the mempool, but not yet confirmed? Simply put, how possible is it to replace or cancel a transaction that has already been added to the mempool?