WildRig Multi 0.18.0 (AMD GPU Miner) [DOWNLOAD]

v0.18.0

Changes v0.18.0:

Added support for the RX 5700 series for a limited number of algorithms:

blake2b-btcc
blake2b-glt
blake2s
bmw512
lyra2v2
lyra2v3
lyra2vc0ban
skein2

Important! Developing almost all of these algorithms that WildRig Multi supports is not the same as mining Cryptonight or Ethereum. These algorithms are more energy intensive and work intensively with the kernel, especially something like x16r.

Therefore, make sure that your power supplies are reliable enough, the GPUs are stable and the voltage for them is set correctly. Low core voltage does not work here in most cases. If you get instability – start from the warehouse and find the optimal settings.

Supported GPU:

2^nd gen GCN : R7 260, R9 290, R9 295X2, R7 360, R9 390
3^rd gen GCN: R9 285, R9 380, R9 Fury, R9 Nano
4^th gen GCN: RX460, RX470, RX480, RX550, RX560, RX570, RX580, RX590
5^th gen GCN: Vega 56, Vega 64, Radeon VII(but need some changes for better performance)

Pitcairn, Tahiti и другие старые карты GCN 1-го поколения (такие как HD 78×0, HD 79×0, R7 265, R9 270, R9 280, R9 370 и т. Д.) Не поддерживаются и не будут, потому что они слишком старые и нуждаются в доработке.

OPTIMAL PARAMETERS:

Начиная с версии 0.15.2 параметры –opencl-threads and –opencl-launch установить автоматически при установке авто. Если вы хотите попробовать другие значения, чтобы найти, вероятно, лучшую производительность, вы можете начать со значений, показанных ниже каждой строки инициализации графического процессора.
E.g. строки ниже означает –opencl-threads 2 –-opencl-launch 21×0. –opencl-launch consist of Intensity x Worksize.

ADVICE:

Some algorithms can grow if you use the –opencl-threads parameter set to 2 or even 3 (for example, phi and skunkhash, but it may be unstable)

Higher intensity is not always more hashrate, try more and less than auto

Try a different working size, for example 64 or 128 instead of the usually used 0 (same as 256).

DEV-Fee:

The default DEV-Fee is 2% and can be reduced.

The wildkeccak algorithm DEV-Fee is 2% unchanged.

OPTIMAL PARAMETERS:

Starting with version 0.15.2, the –-opencl-threads and –opencl-launch options are installed automatically when installing the auto. If you want to try other values to find probably the best performance, you can start with the values shown below each GPU initialization line.
For example. the lines below mean –opencl-threads 2 – opencl-launch 21×0. Where –opencl-launch consists of Intensity x Worksize