TT-Miner v5.0.3: Nvidia GPU miner KAWPOW, ProgPoW, MTP, EAGLESONG, EPIC, ETHASH

TT-Miner- A program for video cards of the Nvidia family. Supports three hashing algorithms. It is mainly used for mining on the ProgPoW algorithm.

Download

TT-Miner v5.0.3

Release 5.0.3 (Windows only!!!)

add support for CUDA 11RC

Features of TT-Miner:

farm management from one computer
GPUs performance monitoring
Hashrate / s performance rating
switching a farm or just one video card to other pools or another coin in a few seconds
low memory and processor power
Supports CUDA 9.2 and CUDA 10.0

Supports Algorithms:

ProgPOW
ProgPOWZ
Ubqhash
MTP
Ethash
Lyra2REv3
KAWPOW
Eaglesong

In the current version, the miner supports cuda 9.2, 10.0, 10.1, 10.2 and 11.0. If you want to make sure that TT-Miner uses a specific version of cuda, add one of these values, if you do not add any of them, the miner will always use the algorithm for the latest version of cuda:

-92 for cuda 9.20 (ETHASH-92, UBQHASH-92)
-100 for cuda 10.00 (ETHASH-100, PROGPOW-100)
-101 for cuda 10.10 (ETHASH-101, MTP-101)
-102 for cuda 10.20 (ETHASH-102, MTP-102)
-110 for cuda 11.00 (ETHASH-110, MTP-110)

Please note the following requirements for different releases of the Cuda Toolkit:

Cuda-Toolkit Linux Windows
CUDA 11.0.189 RC >= 450.36.06 >= 451.22
CUDA 10.2.89 >= 440.33 >= 441.22
CUDA 10.1.105 >= 418.39 >= 418.96
CUDA 10.0.130 >= 410.48 >= 411.31
CUDA 9.2.148 >= 396.37 >= 398.26

You may need the latest version of C ++ for beta 6 if you see the missing VCRUNTIME140_1.dll:

https://support.microsoft.com/ms-my/help/2977003/the-latest-supported-visual-c-downloads

Configure TT-Miner

TradeTec-MinerCmd.exe – indicate in the batch file which program we want to run. This file should be in the same folder as our bat file
PROGPOW-100 – indicate the algorithm of the coin that we are going to mine
iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg – after the construction -P stratum + tcp: // specify the address of our digital wallet. You can take it on the exchange where the coin is traded, or install a cold wallet
rig1 – after we entered the wallet address, put a dot and indicate the name of our farm. You can use any. This is necessary to track statistics on the pool.
bci-eu.coinblockers.com – after the @ sign we indicate the address of the pool. You can select a good pool here.
3910 specifying the address of the pool, put a colon and indicate the port of the pool
–list-devices – the command will display all available devices for mining

So we set up the program for the first launch. How to run it? The cryptocurrency mining process is launched by double-clicking on the created or edited batch file (file with the .bat extension). So, we launch and look at what the program console writes to us.

TradeTec-Miner – the program reports the installed version
Found 2 CUDA devices – two mining devices are available
#0 PCI 0:1 GeForce GTX 1080 Ti (6.1) CoreClk 139 MHz | MemClk 495 MHz | 11264 MB | SM: 28 – the name of the video card, the overclocked core and memory, the available amount of video memory
bci-eu.coinblockers.com:3910 – the pool that we indicated in the batch file
iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg – wallet address to which coins will be sent
YOUR WORKER – name of the farm (optional)
Use algo: ProgPoW (Programmatic Proof-of-Work) – we specified the ProgPoW algorithm
CUDA 10.0 – the cuda architecture on which video cards work
Press ‘Q’ to stop mining and terminate – if you press the Q key in the active miner window, the program will close
Set nonce generation to mode: 3 – timeout: 0.00 secs . – the nonce parameter is set to mode 3. More on this below
Subscribed to bci-eu.coinbiockers.com:3910 – we were able to connect to the pool
Received new job#: d27a – pool sent a new job for video cards
Pool difficulty update: 0.08 GH – the pool set the difficulty to 0.08 GH. convenient power calculator you will find here
Worker authorized: YOUR WORKER – we logged in to the pool
create new DAG for epoch 6 – DAG file for mining is generated. Need to wait a bit
DAG created in 2.7 seconds – A DAG file was created in 2.7 seconds
Accepted 86 ms. bci-eu.coinbiockers.com:3910 – the pool made a decision (share) from our video card. The remuneration to the miners is paid precisely for the number of solved ball.

batch file example:

@echo off

:loop

TradeTec-MinerCmd.exe -A PROGPOW-100 -P stratum+tcp://iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg.rig1@bci-eu.coinblockers.com:3910 --list-devices

rem using payfrom on CoinBlockers
rem TradeTec-MinerCmd.exe -A PROGPOW-100 -P stratum+tcp://iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg.rig1:payfrom=5@bci-eu.coinblockers.com:3910 --list-devices

echo resta